It is always recommended to read through all instructions first, and than perform the actual steps
| 1. | Confirm that the requirements prior to installation and use have been met. |
| a. | Compatible QuickBooks program installed and operational to local hard drive |
| b. | Latest QuickBooks service patch applied |
| c. | You have confirmed access to your QuickBooks company file |
| d. | The QuickBooks component QBFC5.0 is installed (this can be installed before or after installing AyaNova and QBI, but must be installed before running QBI - download from http://www.ayanova.com/download.htm ) |
| i. | or if using the special Australian QuickBooks 2008/2009 compatible QBI, you have installed QBFC7 as per the AyaNova support forum topic http://forum.ayanova.com/Topic4238-94-1.aspx |
| 2. | Install AyaNova and QBI via the AyaNova installation file. |
| a. | Run the AyaNova installation file AyaNovaSetup.exe, and select QBI where indicated to install to your local hard drive |
| b. | Refer to the AyaNova installation steps in the AyaNova Help file for installing AyaNova either for single stand-alone use or for networked use if you require additional assistance. |
| c. | Do note that if you have already installed AyaNova, just run your AyaNovaSetup.exe file again selecting the same installation, and select to install QBI |
| i. | make sure you have AyaNova closed if installing again |
| ii. | when asked if you want to overwrite the config.txt, also select No. |
| d. | The QBI program files will be installed to C:\Program Files\Ground Zero Tech-Works Inc\AyaNova along with your AyaNova program files |
| 3. | QBI uses the same configuration file as the AyaNova program so no further program installation steps are needed |
| 4. | Remember, you must start the QuickBooks program before running QBI |
| 5. | Then run QBI from your Start -> All Programs -> AyaNova -> QBI |
