It is always suggested to read through all instructions first, and than perform the actual steps
| 1. | Confirm that the requirements prior to installation and use have been met. |
| a. | Compatible PeachTree program installed and operational to local hard drive |
| b. | Latest PeachTree service patch applied |
| c. | You have confirmed access to your PeachTree company file |
| 2. | Install AyaNova and PTI via the AyaNova installation file. |
| a. | Run the AyaNova installation, and select PTI where indicated to install to your local hard drive |
| b. | Make sure you select the correct year of your PeachTree program |
| • | ** Refer to the AyaNova Support Forum topic http://forum.ayanova.com/FindPost3981.aspx for steps on how to use with Peachtree 2008 |
| • | **Refer to the AyaNova Support Forum topic http://forum.ayanova.com/FindPost4207.aspx for steps on how to use with Peachtree 2009 |
| c. | Refer to the AyaNova installation steps in the AyaNova Help file for installing AyaNova either for single stand-alone use or for networked use if you require additional assistance. |
| d. | Do note that if you have already installed AyaNova, just run your AyaNovaSetup.exe file again, and select to install PTI |
| i. | make sure you have AyaNova closed if installing again |
| ii. | when asked if you want to overwrite the config.txt, also select No. |
| e. | The PTI program files will be installed to C:\Program Files\Ground Zero Tech-Works Inc\AyaNova along with your AyaNova program files |
| 3. | PTI uses the same configuration file as the AyaNova program so no further program installation steps are needed |
| 4. | Run PTI from your Start -> All Programs -> AyaNova -> PTI |
